ΚΑΛΑΘΙ ΑΓΟΡΩΝ
Το καλάθι σας είναι άδειο
Spinner
contact-phone
ΤΗΛΕΦΩΝΙΚΟ ΚΕΝΤΡΟ
+30 2610 20 20 22

TOP ΕΤΑΙΡΕΙΕΣ

ΟΛΕΣ ΟΙ ΕΤΑΙΡΕΙΕΣ

Η TPL Parts είναι αποκλειστικός αντιπρόσωπος των κορυφαίων εταιρειών μηχανοκίνητου αθλητισμού και ηλεκτρονικών. Περιηγηθείτε στην ευρεία γκάμα κατασκευαστών μας και εξοπλίστε το όχημά σας με προϊόντα υψηλής ποιότητας και απόδοσης.

ΔΕΙΤΕ ΟΛΕΣ ΤΙΣ ΕΤΑΙΡΕΙΕΣ

Slip-On Line Titanium Mufflers for Yamaha YZF R1 (04-06)

Slip-on Titanium Open Oval

Akrapovic
Κατασκευαστής : Akrapovic
Κωδικός : S-Y10SO6-DTT
Barcode : 5210119002702
Διαθεσιμότητα : Σε απόθεμα

13.UPS

Επόμενη αποστολή σε:

19
ΩΡΕΣ
:
04
ΛΕΠΤΑ
* Αν παραγγείλετε τώρα το δέμα σας θα φύγει από την αποθήκη μας σε λιγότερο από 24 ΩΡΕΣ * Εντοπίστε το πακέτο σας οποιαδήποτε στιγμή μέσω του tracking number που θα σας στείλουμε μέσω SMS και e-mail

Πληροφοριες προιοντος

Akrapovic Slip-On Line Titanium Mufflers for Yamaha YZF R1 (04-06)

For the 2004 Yamaha R1 we present a basic version of the Akrapovic SLIP-ON exhaust system with two mufflers and two link pipes. We have also developed an extended version with an optional Y- connecting tube. The basic Akrapovic SLIP-ON system allows the use of the stock catalytic converter. The version with the optional Y- connecting tube extends past the point where the catalytic converter is located, so that the catalytic converter is removed. There is no major difference in performance between the two systems. However, they both outperform the stock system in both power and torque. The system is intended for riders who do not wish to make major exhaust system modifications.

  • Power
    +4.0HPat 8400 rpm
  • Weight
    -0.92kg

PERFORMANCE

Measurements of the Akrapovic SLIP-ON system on the YAMAHA YZF R1

Power: performance measurements were made on both systems. The difference is minimal, with the advantage going to the option with the optional Y-connecting tube, which is slightly better in the middle of the rpm range. There is also a slight difference at the top end, but this does not affect the riding characteristics. Despite being only a first-stage tuning component, the system adds quite a bit of power to the stock engine figures. The standard option without the Y-connecting tube puts out 159.6 HP at 12800 rpm. The option with the optional Y-connecting tube was measured at 159.4 HP at 12700 rpm.

Torque: the torque curves of the two options are also very similar. There is a significant increase over the stock torque curve, especially above 6000 rpm.

Performance

 

stock

AKRAPOVIC

max. increased power

max. rear wheel power
HP / rpm
(measured on Dynojet ATV)
157.9 / 12770 159.6 / 12800 4 / 8400

CONFIGURATION

The basic configuration of the Akrapovic SLIP-ON system for the Yamaha R1 is as follows: the system includes two mufflers, either titanium or carbon-fiber, attached under the seat with carbon-fiber clamps. The cylindrical link pipes are made of titanium and are welded to the mufflers. The connections of the link pipes to the stock header assembly are free-floating joints secured with metal clamps. The system uses the stock catalytic converter.

The Y-connecting tube can be ordered as an option, which expands the basic configuration as follows: The basic system continues with the optional Y- connecting tube, which is conical and made of stainless steel. The Akrapovic Y-connecting tube replaces the stock Y- connecting tube where the catalytic converter is located. The catalytic converter cannot be mounted in the Akrapovic Y- connecting tube. The link pipes and the Y-connecting tube are attached with free-floating joints secured with metal tensioning springs, as is the joint between the Y-connecting tube and the collector.

heat shield

CONFIGURATION

 

header tubes

collector

link pipe

material

- - TITANIUM

tube shape

- - CYLINDRICAL

interference crossover tubes

-

lambda sensor

YES

header tube inner sleeves

-

header tube flanges

-

header tube - collector connection

-

collector / header tube - link pipe connection

FREE FLOATING + METAL CLAMPS

link pipe - muffler connection

WELDED

muffler
inlet cap / outlet cap

TITANIUM / TITANIUM

muffler metal interior

TITANIUM

muffler outer sleeve

TITANIUM / CARBON-FIBER

muffler clamp

CARBON-FIBER ROAD

muffler bracket

-

noise damper

-

heat shield

-

ADDITIONAL DATA

weight comparison (kg)

stock

AKRAPOVIC

difference

4.12 3.20 0.92

noise measurements (dB / rpm)

stock

AKRAPOVIC

97 / 6250 100.9 / 6250

possibility of periodic service without removing A.E.S.

oil

oil filter

YES YES

legal for street use

NO

** Technical specifications of Akrapovic exhaust systems and related products subject to change without notice

Below you may see the diagram data dislaying the difference in Engine Torque and WH Power between stock and Slip-On Line Titanium Mufflers for Yamaha YZF R1 (04-06)

S-Y10SO6-DTT_graph Diagram

Emission Notice

WARNING:

Because of the world-wide distribution of Akrapovič d.d. products, neither Akrapovič d.d. nor any of its subsidiaries make any representation that the products comply with the air and/or noise emissions laws, or labeling laws, of any jurisdiction. The purchasers are entirely responsible for informing themselves of the applicable laws where the products are to be used and to comply with those law.

 

WARNING / USA:

Various U.S. states and the U.S. federal government have individual laws regulating the use of aftermarket exhaust parts and systems, especially as those parts and systems modify, remove, or replace original equipment catalysts. Please consult the appropriate laws in your area before installing any aftermarket part or system on your vehicle to ensure compliance with all applicable laws. Neither Akrapovič d.d., Akrapovič America LLC nor any of their subsidiaries or the sellers of the parts or systems make any representation that any of their parts or systems comply with any such laws.

WARNING / California:

California laws prohibit the use of any aftermarket exhaust part or system that modifies, removes or replaces original equipment catalysts unless the California Air Resources Board has issued an Executive Order regarding such part or system or unless the part or system is exempted by being used only on racing vehicles on closed courses. Neither Akrapovič d.d., Akrapovič America LLC nor any of their subsidiaries make any representation that any of their parts or systems has received such an Executive Order or that any of their parts or systems conform with the racing vehicles exemption. The purchasers are entirely responsible for informing themselves of applicable California laws and to comply with those laws.

Original Akrapovic

Genuine Akrapovic Exhausts

Notice:

The exhausts presented and sold through our sales channels are genuine Akrapovic exhaust systems.

They are not copies but authentic Akrapovic exhaust systems protected with two year warranty

Enjoy the thrilling sound of your exhaust system and be sure that the part you have is of the highest level manufacturing quality provided by Akrapovic.

How to Spot the Real Thing

Power from your engine will increase.

Manufacturing quality is like none other. There sould be no flaws in the body of the exhaust.

That is why the price is at those levels.

If it is too cheap to believe , then it should not be a genuine Akrapovic.

Do not compromise with cheaper and lower quality copies.

No Imitations

ληψεις προιοντος

Παρομοια προιοντα

ΕΠΙΚΟΙΝΩΝΙΑ
+30 2610 20 20 22
Call Center
TPL Contact Email
Email Message
ΩΡΕΣ ΛΕΙΤΟΥΡΓΙΑΣ
Δευτέρα - Παρασκευή 9:00 - 20:00
Σάββατο - Κυριακή Κλειστά
W3C HTML5 validator